Quartz stone production process

- Aug 01, 2017-


according to the required production of color varieties, to prepare a variety of raw materials (quartz sand, resin, coupling agent, curing agent, glass (white glass, mirror glass), toner, titanium dioxide) 

The stirring: 

the first proportion of the deployment of a good resin, coupling agent, curing agent and pigment mixed in a special mixing tank for 2 minutes of mixing. At the same time will be called a good quartz sand, a small amount of glass into the automatic mixing machine, and then add a good mixing resin, curing agent and pigment, to stir with Jun uniform, about 7 minutes.

paving the end of paper: 

the bottom of the prepared mold bedding layer of the same specifications of the kraft paper, the role is to stabilize the quartz stone and mold easily separated from the mold. We are currently the largest specifications of the template is 3.5 meters long by 1.5 meters wide, the inside of the template should also put four inside the plastic strips, the height of the raw rubber than the mold plate 5MM higher than the mold plate. Shop a board 3 people operating about 2 minutes or so time. 


the distribution of raw materials will be distributed evenly on the template, so that it is smooth, the board is basically flat, and then covered with a layer of kraft paper and then pad a layer of rubber, the role is to avoid the pressure of the press Suck the plate up. A 3.5 meters wide and 1.5 meters wide, a 3050 * 1500 * 12 large board, about 250 kilograms of raw materials, if the three people operating cloth about 4 to 5 minutes.